Designed by Precision Dynamics, manufactured in the United States.
The 1-piece crank hub design eliminates the possibility of a crank hub from spinning. We designed our crank hub to have a keyway, with a higher shear strength over dowel pin designs.
The S55, whether stock or modified, has a possibility of crank hub failure. The OEM crank hub is a 3 piece design, utilizing friction disc to retain engine timing together. The friction disc depends on clamping force to clamp down the pieces of crank hub together. As the engine rotates counter clockwise, over time the crank bolt slowly backs out and loses its clamping force. This will cause engine timing to spin out of position. With enough load, engine timing can significantly be out of timing, causing the intake valves to hit against the engine piston. Severe failure such as this will require replacements of intakes valves, which will be an very expensive repair. We recommend to perform a crank hub service as preventative maintenance. While not all crank hubs fail, preventing it from failing will save you thousands of dollars and give a peace of mind.
*Professional Installation Recommended
2014+ F8X M3/M4
2019+ F87 M2 Competition
All E chassis/F chassis N55 engine