Created to perform and provide maximum downforce.
Sometimes giving it the extra edge is just what you need to pull off that aggressive front look too.
Installation is simple, use double sided tape then drill a few self tapping screws in the holes provided on the side. You will need to drill the holes so the bumper will be flush with the canard. Line it up as much as you can. It will not sit perfectly until you do. You will think it seems a little off, so please place it properly then screw them in.
Please have a professional install.
*NOTE* This will only be 100% flush with it screwed into the bumper.
Canard is made of carbon fiber and is made to order.
Comes in a pair. Bottom lip is not included.
Returned are not accepted if product has been installed or used.